Home > Paintball > Paintball Compressors Enclosed

Enclosed Paintball Compressors

Paintball Enclosed Compressors

Coltri / Nuvair Compact

Semi-sound proofed filling station. The compressor switches off automatically when the pressure level set by the operator is reached. Timed automatic condensate discharge using electromagnetic solenoid valves. The tank mounted on the frame holds the condensate for pollution free disposal. Vibration reduction is achieved by insulating the motor and pumping unit from the frame by means of rubber supports. Special consideration has been given to the cooling of the compressor. The cooling fan diameter has been increased to 440 mm and grills on the frame ensure that air flows smoothly through the unit. Oil and filter change are a simple operation on this compressor.

Features Motor Starter Automatic Condensate Drains Dial-A-Pressure Switch Automatic Stop Hour Meter Semi Sound Proof Cabinet External Oil Sight Gauge 5000 PSI Max Pressure 2 Fill Whips Stainless Steel Intercoolers

Options High Temp Shut Down Low Oil Shut Down Interstage Pressure Gauges

Models 8032

Model 8033

	Model MCH13/7	Model MCH16/9
Filling Time *	Approx. 9 min	Approx. 7.5 min
Cubic Feet/Minute	7.6 FAD 8.9 SCFM	9.4 FAD 10.8 SCFM
Liters/Minute	215	265
Motor	Single or Three Phase Electric	Single or Three Phase Electric
Option E1 230V-50 or 60Hz	25 Amp	34 Amp (Model# 8033.1)
Option E3 230V-50 or 60Hz	14 Amp	20 Amp (Model# 8032.2)
Option E3 440V-50 or 60Hz	7 Amp	10 Amp (Model# 8032.3)
Motor Power	5.5 hp (4 kW)	7.5 hp (5.5 kW)
Max. Op. Pressure	5000 PSI (345 bar)	5000 PSI (345 bar)
RPM	1350	1550
Number of Stages	3	3
Number of Fill Hoses	2	2
Condensate Drain	Automatic	Automatic
Fill Pressure Stop	Automatic	Automatic
Sound Level @ 3 Meters	79 dB	81 dB
Dimensions (HxWxD)**	33"x35"x24" (84x89x60cm)	33"x35"x24" (84x89x60cm)
Weight	310-400 lbs(141-181 kg)	332-430 lbs(151-195 kg)
Lubrication	Splash lubrication, capacity 1.6 qt.
Air Quality	DIN 3188 - CGA Grade E - NFPA 1500 - EN12021

*Single cylinder from 500 to 3000 PSI
**Singe Phase enclosure 33"x42"x28" (84x105x70cm)

Please contact us for more information or to place your order.

---

Coltri / Nuvair 250

The Nuvair 250 Air Compressor uses a pumping unit that is made from top quality materials; connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that are more than four meters in length, and cylinders of special cast iron. The electric motor uses an aluminum housing to keep weight to a minimum, making the compressor very compact.

Click Here or Image for PDF Brochure

Features 2 Fill Whips Electric, Gas or Diesel Motor Stainless Steel Intercoolers

Options Motor Starter (electric) Automatic Condensate Drains Pressure Switch Hour Meter High Temp Shut Down Low Oil Shut Down Interstage Pressure Gauges Stainless Frame Dial-A-Pressure Switch

Filling Time *	Approx. 7.4 Minutes
Cubic Feet/Minute	9.4 FAD 10.8 SCFM
Liters/Minute	265
230 V /E1 / 50 or 60 Hz	34 Amp 7.5 hp (5.5 kW) Model# 8030.1
230 V / E3 / 50 or 60 Hz	20 Amp 7.5 hp (5.5 kW) Model# 8031.2
440 V / E3 / 50 or 60 Hz	10 Amp 7.5 hp (5.5 kW) Model# 8031.3
Honda Gas	9 hp (6.6 kW) Model# 8027-EL
Yanmar Diesel	10 hp (7.5 kW) Model# 8028-DY-EL
Kohler Diesel	9 hp (6.6 kW) Model# 8029-DL-EL
Max Operating Pressure	5000 PSI (345 bar)
RPM	1550
Number of Stages	3
Number of Fill Hoses	2
Condensate Drain	Manual
Sound Level @ 3 Meters	80-96 dB
Dimensions (HxWxD)	31"x44"x23" (79x112x58 cm)
Weight	320-421 lbs (145-191 kg)
Lubrication	Splash lubrication, capacity 1.6 qt.
Air Quality	DIN 3188 - CGA Grade E - NFPA 1500 - EN12021
Options
Motor Start	$230.00
Auto Drains**	$920.00
Pressure Switch**	$175.00

*Single 80 Cu. Ft. Cylinder from 500 to 3000 PSI
**Requires: Motor Starter Option

Please contact us for more information or to place your order.