Home > Paintball Soltuions > Open Frame Compressors
Paintball Open Frame Compressors
Coltri / Nuvair Standard Electric
The Nuvair Standard Electric uses a pumping unit that is made from top quality materials: connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that are more than four meters in length, and cylinders of special cast iron. The electric motor uses an aluminum housing to keep weight to a minimum, making the station very compact. |
|||
| Model | MCH13 / 5 | MCH13 / 7 | |
| Filling Time * | Approx. 11 min | Approx. 9 min | |
| Cubic Feet/Minute | 4.7 FAD 6.6 SCFM | 7.6 FAD 8.9 SCFM | |
| Liters/Minute | 133 | 215 | |
| Motor Options: | Single or Three Phase Electric | Single or Three Phase Electric | |
| 230 V / E1 / 50 or 60 Hz |
19 Amp (Model# 8017) |
25 Amp (Model# 8020.1) |
|
| 230 V / E3 / 50 or 60 Hz |
11 Amp (Model# 8018) |
14 Amp (Model# 8019.2) |
|
| 440 V / E3 / 50 or 60 Hz | N/A |
7 Amp (Model# 8019.3) |
|
| Engine Power | 4 hp (3 kW) | 5.5 hp (4 kW) | |
| Max Operating Pressure | 5000 PSI (345 bar) | 5000 PSI (345 bar) | |
| RPM | 890 | 1350 | |
| Number of Stages | 3 | 3 | |
| Number of Fill Hoses | 2 | 2 | |
| Condensate Drain | Manual | Manual | |
| Sound Level @ 3 Meters | 75 dB | 81 dB | |
|
Dimensions (HxWxD) |
25"x34"x18" (64x86x45 cm) |
25"x34"x18" (64x86x45 cm) |
|
| Weight | 218 lbs (99 kg) | 218 lbs (99 kg) | |
| Lubrication | Splash Lubrication, capacity 1.6 qts. | ||
| Options | |||
| Motor Start | $230.00 | $230.00 | |
| Auto Drains** | $920.00 | $920.00 | |
| Pressure Switch** | $175.00 | $175.00 | |
*Single 80 Cu. Ft. Cylinder from 500 to 3000 PSI
**Requires: Motor Starter Option
Please contact us for more information or to place your order.
Coltri / Nuvair Standard Gas
This compressor is powered by a 4-stroke gas engine. The frame has been constructed to allow a three-phase electric motor to be fitted if required. This is a light weight unit and has a lifting handle for easy transportation. |
|
||||||||||||||||||||||||||
Coltri / Nuvair Mini Tech
The Nuvair Mini Tech air compressor uses a pumping unit that is made from top quality materials; connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that are more than four meters in length, and cylinders of special cast iron. The electric motor uses an aluminum housing to keep weight to a minimum, making the station very compact.
Click Here or Image for PDF Brochure |
Click Here or Image for PDF Brochure |
Features
|
Options
|
| Model | MCH 13 / 7 | MCH 16 / 9 |
| Filling Time * | Approx. 9 Minutes | Approx. 7.4 Minutes |
| Cubic Feet/Minute | 7.6 FAD 8.9 SCFM | 9.4 FAD 10.8 SCFM |
| Liters/Minute | 215 FAD | 265 FAD |
| 230 V / E1 / 50 or 60Hz | 25 Amp 5.5 hp (4 kW) Model# 8040.1 | 34 Amp 7.5 hp (5.5 kW) Model# 8037.1 |
| 230 V / E3 / 50 or 60 Hz | 14 Amp 5.5 hp (4 kW) Model# 8040.2 | 20 Amp 7.5 hp (5.5 kW) Model# 8037.2 |
| 440 V / E3 / 50 or 60 Hz | 7 Amp 5.5 hp (4 kW) Model# 8040.3 | 10 Amp 7.5 hp (5.5 kW) Model# 8037.3 |
| Honda Gas | 6.5 hp (4.1 kW) | 9 hp (6.6 kW) Model# 8038 |
| Yanmar Diesel | N/A | 10 hp (7.5 kW) Model# 8038-DY |
| Kohler Diesel | N/A | 9 hp (6.6 kW) Model# 8038-DL |
| RPM | 1350 | 1550 |
| Sound Level @ 3 Meters | 81 dB | 80-96 dB |
| Max Operating Pressure | 5000 PSI (345 bar) | |
| Number of Stages | 3 | |
| Number of Fill Hoses | 2 | |
| Condensate Drain | Manual (auto optional) | |
| Dimensions (HxWxD) | 25" x 44" x 21" (64 x 112 x 54 cm) | |
| Weight | 320-421 lbs (145-191 kg) | |
| Lubrication | Splash lubrication, capacity 1.6 qt. | Options |
| Motor Start | $230.00 | $230.00 |
| Auto Drains** | $920.00 | $920.00 |
| Pressure Switch** | $175.00 | $175.00 |
*Single 80 Cu. Ft. Cylinder from 500 to 3000 PSI
**Requires: Motor Starter Option
Please contact us for more information or to place your order.
Coltri / Nuvair MCH30/21 & MCH36/26 Open
The Open MCH30 & MCH36 open cabinet is designed for high use in hot humid conditions and is rated for continuous duty use up to 6000 PSI. It has the MCH30 or MCH36 four stage compressor block with up to 26.4 SCFM charging rate. Purchase, maintenance and operation costs are significantly lower than similar sized compressors in the market place.
Click Here or Image for PDF Brochure |
Features
|
Options
|
| Model | MCH 30 | MCH 36 |
| Filling Time * | Approx. 3.5 min | |
| Cubic Feet/Minute | 17.5 FAD 21 SCFM | 22 FAD 26.4 SCFM |
| Liters/Minute | 500 FAD | 623 FAD |
| Engine | Three Phase Electric | |
| 230 V / E3 / 50 or 60Hz | 31 Amp 15 hp (11 kW) (Part#8042.2) | 35.5 Amp 20 hp (15 kW)(Part#8044.2) |
| 400 V / E3 / 50 or 60 Hz | 18 Amp 15 hp (11 kW) (Part#8042.6) | 20 Amp 20 hp (15 kW)(Part#8044.6) |
| 460 V / E3 / 50 or 60 Hz | 16 Amp 15 hp (11 kW)(Part#8042.3) | 22 Amp 20 hp (15 kW)(Part#8044.3) |
| RPM | 1100 | 1300 |
| Max Operating Pressure | 6000 PSI (414 Bar) | |
| Number of Stages | 4 | |
| Number of Fill Hoses | 4 | |
| Condensate Drain | Auto Drains | |
| Sound Level @ 1 Meters | 83 dB | |
| Dimensions (HxWxD) | 60" x 40" x 30" (153 x 102 x 76 cm) | |
| Weight | 800 lbs (363 Kg) | |
| Lubrication | Splash lubrication, capacity 4.5 qt. | |
| Air Quality | DIN 3188 - CGA Grade E - NFPA 1500 - EN12021 | |
*Single cylinder from 500 to 3000 PSI
Please contact us for more information or to place your order.
Coltri MCH 30 and 36 Compressors open horizontal with diesel engine
The Nuvair Commercial Compressor series use our largest Compressor Block that is made from top quality materials; connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers, and cylinders of special cast iron. We use marine grade aluminum for our frame and belt guard that can be left raw or powder coated. Bottom drip pan, four point lifting eyes and forklift slots round out the package. These packages are built for continuous use and heavy duty durability. Check out the brochure link for a full list of options and configurations below.
Features
|
Options
|
Click Here or Image for PDF Brochure |
| Model | MCH 30D | MCH 36D |
| Cubic Feet/Minute | 17.5 FAD 21 SCFM | 22 FAD 26.4 SCFM |
| Liters/Minute | 500 FAD | 623 FAD |
| Make and Model of Engine | Kohler 19 hp (14 kW) Model# 8046-DL | Kohler 28.5 hp (21 kW) Model#8048 |
| RPM | 3600 | 3000 |
| Max Operating Pressure | 6000 PSI (414 Bar) | 6000 PSI (414 Bar) |
| Number of Stages | 4 | 4 |
| Number of Fill Hoses | 2 | 2 |
| Condensate Drain | Auto Drains | Auto Drains |
| Dimensions (HxWxD) | 44" x 64" x 32" (112 x 163 x 81 cm) | 44" x 64" x 32" (112 x 163 x 81 cm) |
| Weight | 760 lbs (345 Kg) | 900 lbs (408 Kg) |
| Lubrication | Splash lubrication, capacity 4.5 qt. | |
| Air Quality | DIN 3188 - CGA Grade E - NFPA 1500 - EN12021 | |
Please contact us for more information or to place your order.
TopColtri MCH 30 and MCH 36 Compressor open horizontal with electric motor
The Open MCH 30 & MCH 36 open is designed for high use in hot humid conditions and is rated for continuous duty use up to 6000psi. It has the MCH30 or MCH36 four stage compressor block with up to 26.4SCFM charging rate. Purchase, maintenance and operation costs are significantly lower than similar sized compressors in the market place.
Features
|
Options
|
Click Here or Image for PDF Brochure |
| Model | MCH 30 | MCH 36 (Model#8049-Specify V & Hz) |
| Cubic Feet/Minute | 17.5 FAD 21 SCFM | 22 FAD 26.4 SCFM |
| Liters/Minute | 500 FAD | 623 FAD |
| 230 V / E3 / 50 or 60Hz | 31 Amp 15 hp (11 kW) Part# 8042.2-HZ | 35.5 Amp 20 hp (15 kW) |
| 400 V / E3 / 50 or 60 Hz | 18 Amp 15 hp (11 kW) Part# 8042.6-HZ | 20 Amp 20 hp (15 kW) |
| 460 V / E3 / 50 or 60 Hz | 16 Amp 15 hp (11 kW) Part# 8042.3-HZ | 22 Amp 20 hp (15 kW) |
| Max Operating Pressure | ||
| Number of Stages | ||
| Number of Fill Hoses | ||
| Condensate Drain | ||
| Dimensions (HxWxD) | ||
| Weight | ||
| Lubrication | ||
| Air Quality | ||
Please contact us for more information or to place your order.
Follow us on:
Corporate Office: 2949 West 5th Street, Oxnard CA 93030, USA Tel: 1-805-815-4044 Fax: 1-805-815-4196