Air Compressors
High Pressure
Jump to:
Enclosed Systems

Nuvair Compact

Semi-sound proofed filling station. The compressor switches off automatically when the pressure level set by the operator is reached. Timed automatic condensate discharge using electromagnetic solenoid valves. The tank mounted on the frame holds the condensate for pollution free disposal. Vibration reduction is achieved by insulating the motor and pumping unit from the frame by means of rubber supports. Special consideration has been given to the cooling of the compressor. The cooling fan diameter has been increased to 440 mm and grills on the frame ensure that air flows smoothly through the unit. Oil and filter change are a simple operation on this compressor.


Models 8032 & 8039



Model 8033

DIN and INT pressure reducer
Code - RE100350

Version with 200 bar DIN fitting
Code - SC000470

Version with 300 bar DIN fitting
Code - SC000460
*Single cylinder from 500 to 3000 PSI
**Singe Phase enclosure 33"x42"x28" (84x105x70cm)
Model 7 Model 9
Filling Time * Approx. 9 min Approx. 7.5 min
Cubic Feet/Minute 7.6 FAD 8.9 SCFM 9.4 FAD 10.8 SCFM
Liters/Minute 215 265
Engine Single or Three Phase Electric Single or Three Phase Electric
Option E1 230V-50/60Hz 25 Amp 34 Amp (Model# 8033)
Option E3 230V-50/60Hz 14 Amp 20 Amp (Model# 8032)
Option E3 440V-50/60Hz 7 Amp 10 Amp (Model# 8039)
Engine Power 5.5 hp (4 kW) 7.5 hp (5.5 kW)
Max. Op. Pressure 5000 PSI (345 bar) 5000 PSI (345 bar)
RPM 1350 1550
Number of Stages 3 3
Number of Fill Hoses 2 2
Condensate Drain Automatic Automatic
Fill Pressure Stop Automatic Automatic
Sound Level @ 3 Meters 79 dB 81 dB
Dimensions (HxWxD)** 33"x35"x24" (84x89x60cm) 33"x35"x24" (84x89x60cm)
Weight 310-400 lbs(141-181 kg) 332-430 lbs(151-195 kg)
Lubrication Splash lubrication, capacity 1.6 qt.
Air Quality DIN 3188 / CGA Grade E

Please contact us for more information or to place your order.





Nuvair 26 Open


Nuvair 26 Open

After considerable research development and testing Nuvair is proud to release a 26 SCFM charging rate compressor, rated for continuous duty at up to 6000psi. Unsurpassed in quality, reliability and price; the Nuvair 26 Open package is designed for high use in hot humid conditions. Purchase, maintenance and operation costs are significantly lower compared to other compressors in the market.

Features:
· Open Configuration for easy access and cool running
· Operation Panel with Start/Stop, "Dial A Pressure" Automatic Shutdown, Condensate Test Button, High Temperature Display, Automatic Shutdown for High Temperature and Low Oil, Phse Control (Proper Rotaion) Recognition, Wrong Voltage Recognition, Hour Meter, Stage and Oil Pressure Gauges
· Low Pressure Oil Pump, Filter and Oil Level Sight Gauge
· Large Stainless Steel Interstage Cooling Tubes with Large Condensate Separators
· Dual Filter Fitration 60,000 cu ft
· 20 hp Electric 3 phase 60 or 50 Hz


Options:
· 15 hp (13Kw) 17 cfm @ 6000 PSI 760 lbs.
· Pro 4 Warn O2, CO2, CO and Moisture Analysis
· Fill Stop if Air Quality does not meet Grade E Spec.
· Preset Maximum Fill Block 3000 PSI and 4500 PSI

Filling Time * Approx. 3.5 min
Cubic Feet/Minute 22 FAD 26 SCFM
Liters/Minute 752
Engine Three Phase Electric
Type 4 Cylinder, Air Cooled, Pressurized Oil Lubricated Compressor
Operating Temperature 32°F - 20°F (0°C - 48°C)
Engine Power 20 hp (15 kW)
Max. Op. Pressure 6000 PSI (413 bar)
RPM 1250
Number of Stages 4
Number of Fill Hoses 4
Condensate Drain Automatic
Fill Pressure Stop Automatic
Sound Level @ 1 Meters 83 dB
Dimensions (HxWxD)** 65.5"x31.5"x39" (167x80x99cm)
Weight 800 lbs(363 kg)
Lubrication Pressure Lubrication, Capacity 4.5 qts.
Air Quality DIN 3188 / CGA Grade E

Please contact us for more information or to place your order.



Custom Build - High Pressure Dock Box


Leave it out in the weather and don't care!
Various fittings available depending on application.

HP Dock Box HP Dock Box

Nuvair Standard Electric

The Nuvair Standard Electric uses a pumping unit that is made from top quality materials: connecting rods from aluminum alloy, stainless steel intercoolers and aftercoolers that are more than four meters in length, and cylinders of special cast iron. The electric motor uses an aluminum housing to keep weight to a minimum, making the station very compact.

Compressor Nuvair 7 Nuvair 9
Filling Time * Approx. 9 min Approx. 7.5 min
Cubic Feet/Minute 7.6 FAD 8.9 SCFM 9.4 FAD 10.8 SCFM
Liters/Minute 215 265
Engine Single or Three Phase Electric Single or Three Phase Electric
Option: E1 230V-50/60 Hz 25 Amp
(Model# 8020) 		34 Amp
(Model# 8023)
Option: E3 230V-50/60 Hz 14 Amp
(Model# 8019) 		20 Amp
(Model# 8022)
N/A 7 Amp
(Model# 8037) 		10 Amp
(Model# 8038)
Engine Power 5.5 hp (4 kW) 7.5 hp (5.5 kW)
Max. Op. Pressure 5000 PSI (345 bar) 5000 PSI (345 bar)
RPM 1350 1550
Number of Stages 3 3
Number of Fill Hoses 2 2
Condensate Drain Manual Manual
Sound Level @ 3 Meters 81 dB 82 dB
Dimensions
(HxWxD) 		27.5" x 44" x 26.5"
(70 x 112 x 67 cm) 		27.5" x 44" x 26.5"
(70 x 112 x 67 cm)
Weight 248 lbs (112.5 kg) 270 lbs (122.5 kg)
Lubrication Splash Lubrication, capacity 1.6 qts.
Air Quality DIN 3188 / CGA Grade E

Please contact us for more information or to place your order.


Nuvair Home | Shop Online | Checkout

Compressors | Paintball Solutions | Nitrogen Solutions | Nitrox Solutions

Nitrox Membranes | Gas Analyzers | Nitrox & Compressors Accessories

Fill-Containment Stations | Panels & Fill Stations | Dive Gear | Used Compressors


Warranty Registration | Configurations & Drawings | Links | Job Opportunities | Contact Us | About Us | Site Map

Nuvair
2949 West 5th Street
Oxnard, CA 93030
info@nuvair.com 		1-805-815-4044 phone
1-805-815-4196 fax
Link to Our BBBOnLine Reliability Report

© 2003 by Nuvair. All Rights Reserved. Text, graphics, images, and HTML code are protected by US and International Copyright Laws, and may not be copied, reprinted, published, translated, hosted, or otherwise distributed by any means without explicit permission.