Nuvair 250
The Nuvair 250 uses a pumping unit that is made from top quality materials; connecting rods from aluminum alloy,
stainless steel intercoolers and aftercoolers that are more than four meters in length, and cylinders of special cast iron.
The three-phase electric motor uses an aluminum housing to keep weight to a minimum, making the station very compact.
|
| Cubic Feet/Minute |
9.4 FAD 10.8 SCFM |
| Liters/Minute |
265 |
| E1 230V-50/60Hz (34 A) 7.5 hp (5.5 kW) |
Code 8030 |
| E3 230V-50/60Hz (20 A) 7.5 hp (5.5 kW) |
Code 8031 |
| E3 440V-50/60Hz (10 A) 7.5 hp (5.5 kW) |
Code 8040 |
| Honda Gas 9 hp (6.6 kW) |
Code 8027 |
| Yanmar Diesel 10 hp (7.5 kW) |
Code 8028 |
| Honda Diesel 9 hp (6.6 kW) |
Code 8029 |
| Max.Op. Pressure |
5000 PSI (345 bar) |
| RPM |
1550 |
| Number of Stages |
3 |
| Condensate Drain |
Manual |
| Sound Level @ 3 Meters |
80-96 dB |
| Dimensions (HxWxD) |
31"x44"x23" (79x112x58 cm) |
| Weight |
320-421 lbs (145-191 kg) |
| Lubrication |
Splash lubrication, capacity 1.6 qt. |
|