The inlet hose has a hand tightened CGA540 adapter with a built in sintered filter followed by a bleed valve. All fittings are stainless steel and O2 clean.

The outlet hose has all stainless steel fittings with a brass on/off valve followed by a stainless steel tee with a 5000 PSI/Bar analog stainless steel gauge and a 200 or 300 DIN fill adapter.

Hose package includes a BC connect fitting for air inlet from your SCUBA tank via regulator and BC fill hose. Both hoses rated for 5000 PSI.

The inlet hose has a hand tightened CGA540 adapter with a built in sintered filter followed by a bleed valve. All fittings are stainless steel and O2 clean.

The outlet hose has all stainless steel fittings with a brass on/off valve followed by a stainless steel tee with a 5000 PSI/Bar digital gauge and a 200 or 300 DIN fill adapter.

Hose package includes a BC connect fitting for air inlet from your SCUBA tank via regulator and BC fill hose. Both hoses rated for 5000 PSI.

The stainless steel braided inlet hose has a hand tightened CGA540 adapter with a built in sintered filter followed by a bleed valve.

The stainless steel braided outlet hose has all stainless steel fittings with a brass on/off valve followed by a stainless steel tee with a 5000 PSI/Bar analog stainless steel gauge and a 200 or 300 DIN fill adapter.

Hose package includes a BC connect fitting for air inlet from your SCUBA tank via regulator and BC fill hose. Both hoses rated for 3000 PSI.

Commercial, Military and Private Life Support

The Model 26968 Oxygen Booster Unit is designed for the use of filling 02 cylinders for use in commercial and military scuba diving applications, has come to realize broader applications in the transferring Of 02 into various high pressure receivers many industrial applications.
This model will pump from high or medium pressure sources and will also function effectively to collect and transfer the gas from partially depleted supply cylinders to "top off" other cylinders in order to maximize pressure.
Conventional compressed air sources are used for all power and control. No electrical connections are required.
The basic booster is twostage. A pneumatic control package continually monitors both inlet cylinder pressure and outlet receiver pressure, stopping the booster automatically when desired outlet or minimum inlet pressure is reached, thus permitting unattended operation.

Industrial Fire Departments

Drive is low friction, slow speed cycling air cylinder, designed for continuous duty without air line lubrication. Vented distance pieces insure hydrocarbon-free gas section operation. High pressure oxygen seals are wear compensating, immune to sudden failure and operate completely non-lube, oil free.
Very cold air (as low as -20¼F) is a natural by-product from the air powered drive exhaust. This frigid exhaust air is channeled through a system of cooling jackets and interstage cooler, resulting in high pressure cylinder temperatures well below limits needed for long life of critical parts.