Pro Trio Analyzer

Designed for dive operators and tec divers who require simultaneous analysis of oxygen, carbon monoxide and carbon dioxide in breathing gases, the Nuvair Pro Trio multigas analyzer has visual and audible alarms that sound when alarm set points are exceeded. Equipped with an optional relay, the Pro Trio can shut down a compressor or sound external alarms when gases exceed threshold alarm settings.

SKU
9603
$2,500.00

The Nuvair Pro Trio multigas analyzer measures oxygen (O2), carbon dioxide (CO2), and carbon monoxide (CO) levels in supplied gases. All analyzers are mounted in a water resistant, impact resistant case with a clear cover that allows for viewing of all gas displays, visual alarms, and easy access to analyzer controls. This unit is compatible with outdoor and marine environments.

The internal sensors are plumbed together to monitor a single input. The Pro Trio has visual and optional audible alarms for each of the gases monitored. An audible alarm will sound if any alarm set point is reached. If the alarm sounds, the analog output can activate an optional relay that shuts down compressors automatically, sounds a remote alarm, or activates emergency backup systems.

PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required.

Specifications

Sensor Pro CO PRO CO2 PRO O2
Maximum Flow Rate 0.5-1 L/min 0.5-1 L/min 0.5-3 L/min
Resolution 1 ppm 1 ppm* 1%
Repeatability <+5% ±2% of full scale @ 68°F (20°C) ambient N/A
Display Accuracy ±5% ±5% ±0.1%
Response Time <50 seconds <30 @ 68°F (20°C) ambient <6 seconds for 90% of final value
Sensor Type Electrochemicial Non-dispersive infrared Electrochemical
Expected Sensor Life >24 months 5 years 36 months
Range 0-50 ppm CO 0-2500 CO2 0-100% volume
Operating Temperature 14° to 122°F (-10° to 50°C) continuous
-4° to 122°F (-20° to 50°C) intermittent
-4 to 122°F (-20 to 50°C) 32 to 104°F (0-40°C)
Storage Temperature 14 to 140°F (-10 to 60°C) -4 to 122°F (-20 to 50°C) 32 to 122°F (0 to 50°C)
Operating Humidity 15-90% rh (con-condensing) 0-95% rh, non-condensing 0-99% rh, non-condensing
Dimensions
(L x W x H)
Weight
6 x 6 x 5 in
(15 x 15 x 13 cm)
4 lb (1.8 kg)
Warranty 1 year

* All specifications are at ambient/sea level, 77°F (25°C) and are subject to change without notice. Calibration must be confirmed with a calibration CO2 test gas.