Paintball/Airgun Storage Regulator Series
The PB415 Series is designed for regulating paintball/airgun storage pressure to fill panels. Choose from four configurations. Maximum inlet pressure ranges from 4500 to 6000 psi. Maximum outlet pressures are 0 to 400, 4500, 5000 and 6000 psi. Equipped with two 2.5 in stainless steel pressure gauges; one reads storage pressure and one reads regulated pressure. The model 415 is a piston type, hand load regulator that uses an unbalanced poppet design for ruggedness and simplicity. There is a small variation of control pressure with changing inlet pressure as noted in the specifications. A 30 micron filter in the poppet cartridge helps prevent damage by contaminants.
|PB415-347||4500 psi||0–4500 psi||347||0–6000 psi||0–6000 psi|
|PB415-347-LP||6000 psi||0–400 psi||347||0–6000 psi||0–400 psi|
|PB415-677||6000 psi||0–5000 psi||677||0–10,000 psi||0–10,000 psi|
|PB415-702||5000 psi||0–5000 psi||680/695/702||0–10,000 psi||0–10,000 psi|
415-400 Regulator Operation & Maintenance
Repair Kit for 415 Series Regulators