Skip to the beginning of the images gallery

Pro CO Analyzer with Low Pressure Alarm

$1,040.00

This model of the Pro CO Analyzer combines carbon monoxide detection and a low pressure alarm in a water- and impact-resistant case with a clear cover that is compatible with outdoor and marine environments. Manufactured for the needs of surface-supplied working divers.

SKU

9621.5

Details

This version of the Pro CO Alarm analyzer detects:

(1) CO in air flow from an operating compressor in excess user-defined setpoints
(2) Low air supply pressure, factory set at 100 psi (7 bar)

If the analyzer readings fall outside of alarm setpoints, a relay sounds a piezo alarm and illuminates one of two panel LEDs (one each for CO and pressure). This same relay can activate an external relay to automatically shutdown compressors, sound an external alarm or activate emergency backup systems.

WARNING: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, a Flow Restrictor and Regulator may be required. A faulty Flow Restrictor can lead to a false analyzer reading. Flow Restrictors should be regularly tested with a Flow Meter. Inaccurate gas analysis can lead to serious personal injury or death.

Features

Compressor mounted instrument
LCD display
On/Off switch
Rugged weatherproof housing
Low maintenance required
Low power consumption
Battery test function
Audible and visual alarms

Specifications

Flow Rate	0.5-1 L/min
Resolution	1 ppm CO
Repeatability	<+5%
Accuracy	±5%
Sensor Type	Electrochemical (CO)
Expected Sensor Life	>24 months in normal use from date of manufacture (CO)
Range	0-50 ppm CO
Alarms	• Two user-programmable audible and visual CO alarms • Low pressure alarm at 100 psi (7 bar)
Response Time	<50 seconds over complete temperature range (CO)
Operating Temperature	14° to 122°F (-10° to 50°C) continuous -4° to 122°F (-20° to 50°C) intermittent
Operating Humidity	Non-condensing: 15-90% continuous; 0-99% intermittent
Storage Temperature	14° to 140°F (-10° to 60°C)
Power	Wall Plug-in International (SKU 9621.5-E) 800mAh Rechargeable Lithium Battery (SKU 9621.5-LB)
Dimensions (L x W x H)	7.41 × 7.79 × 4.31 in (18.8 × 19.8 × 10.9 cm)
Weight	7.8 oz (0.22 kg)
Warranty	12 months
Replacement Sensor	SKU 9501