DE-OX SAFE Carbon Monoxide Analyzer


Analyze scuba tanks for carbon dioxide (CO) contamination with DE-OX SAFE. Especially designed for analyzing breathable gas mixtures like nitrox, heliox and trimix, the handheld DE-OX SAFE can also be connected to a gas compressor for continuous in-line analysis. Two custom audible and visual alarms included.

DE-OX SAFE computer represents the most up-to-date measurement instrument that technology allows for the analysis of carbon monoxide (CO) into mixed gas. It has been especially designed and manufactured for the analysis of breathable gas mixtures like nitrox, heliox and trimix.

DE-OX SAFE is an integrated electronic device driven by a CMos microprocessor and one electrochemical sensor for carbon monoxide. This sensor gives electrical signals with the gases percentage in the mixed gas. On the central unit’s display, these signals are transformed in easy-to-read information given in real time.


  • Fast response
  • Small portable shell
  • Numeric display - 2 x 0.7 in (5 x 3.5 cm)
  • Low battery indicator
  • On/Off switch
  • Rugged weatherproof housing
  • Low power consumption
  • Two custom audible and visual alarms
  • Soft protection and transport bag
  • Simple sensor and battery replacement
  • Analog 4-20 mA output for external devices


Range: 0-100 ppm carbon monoxide
Display Resolution:  1 ppm
Display Accuracy: ±5% at Constant Temperature and Pressure
Sensor Type: Electrochemical
Expected Operating Life*: >2 years in normal use from date of manufacture
Power: Standard 9 volt battery
Response Time: <50 seconds over complete temperature range
Temperature Range: Continuous: 14-122°F (-10°C to +50°C)
Intermittent: -4° to 122°F (-20°C to +50°C)
Storage Temperature: 41-104°F (5-10°C)
Humidity Range*: Continuous: 15-90% non-condensing
Intermittent: 0-99% non-condensing
Warranty: 12 months for device; 6 months for sensor
Weight: 8.8 oz (250 g)

All measurements were taken at 20°C and 505 rh at 1 atmosphere pressure unless otherwise indicated. The performance data detailed in this document refer to new sensors - With the exception of items marked * the parameters have been verified under the UL component recognition program.

To Top